The RAC-GE air tight system provides maximum security and reliability for connecting pipes in plumbing and heating installations with working temperatures from -10ºC to +90º C.
Specially adaptable for connecting low and high density polyethylene pipes. Connectors can be used with different pressure levers, most usual water maximum pressure is 16 bar.
The special feature of this system lies on the fastening necking. The necking, Genebre’s patented, is made out of a special type of brass with the required elasticity for assembling and dissembling the fitting. Its symmetrical shape allows to be mounted in any position. The locking system is “by points”, which prevents the cutting of the pipe and offers better adapting.
GENEBRE VALVES: GUARANTEED QUALITY
The Genebre valves and accessories are marked CW617N, a code that indicates that the brass valves are of the highest quality with low lead and other impurity content (like iron, tin, nickel and aluminium), in compliance with the European standard UNE EN 12.165.
ASSEMBLING INSTRUCTIONS
These instructions avoid any deformation of the pipe which could prevent its correct assembling. In the figure below there is an exemple illustration of the assembling process.
A- Disassemble the nut (1) from the connector (5) and insert it into the pipe.
B- Insert the necking (2) into the pipe.
C- Insert the washer ring (3) into the pipe.
D- Insert the O’ring (4) into the pipe.
E- Place the pipe with all the components inside the body of the connector (5) until the pipe is fixed.
F- Tighten the nut (1) to the body of the connector (5).
Know your opinion is important for us, this is how we can find best solutions.
Write your comment here.
Monday to Thursday from 8:30 a.m. to 1:30 p.m. and from 3:00 p.m. to 6:00 p.m. Friday from 8:00 a.m. to 4:00 p.m.